Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Escondido
If you’re searching for gate repair in Escondido, you’ve probably got a gate that’s sagging, dragging, or not opening at all. Most repairs here run $180 to $640 depending on whether we’re fixing a hinge, re-hanging a gate on a sloped driveway, or replacing a burned-out operator. We’re a dedicated Gate Repair company based in Rancho Bernardo, and we send our own technicians to Escondido daily, usually within 24 to 48 hours for non-emergency calls. Neil Strickland leads our team, and he’s built the business around one thing: gates. Not fencing, not garage doors, gates. Call (855) 532-9392 for a free estimate, quoted before we start.
Why Gate Repair Rancho Bernardo Is Escondido’s Preferred Gate Repair Company
Escondido property owners call us because we work on the brands already on their gate. LiftMaster, FAAC, Elite, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, BFT. That’s nine gate operator manufacturers, and our techs have certified working knowledge across the residential and commercial lines. We don’t show up, squint at the opener, and start guessing. We diagnose it right the first time. That matters in Escondido because so many of the calls we get are second-opinion calls after a generalist handyman or a garage door company already took a swing at it.
Electric gate repair is a specialty, not a side job. Our trucks carry parts for the systems Escondido homeowners actually have, so we’re not ordering a board and waiting a week. We also service both sides of the gate: the steel or wrought iron structure and the automation. One call covers the gate and the operator. That single point of contact saves property managers and HOA board members from coordinating between a fabricator and an automation tech.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Escondido
Wrought Iron Gate Repair in Escondido covers everything from a pedestrian gate that scrapes the walkway to a 20-foot driveway gate that drags on one side. A typical wrought iron repair here runs $220 to $520, depending on whether we’re reinforcing the hinge post, welding a cracked stile, or re-hanging the whole leaf. The older homes in 92025 are where we see the worst of it. Wrought iron gates set directly into original 1920s concrete crack and pull loose when the concrete spalls or the post rots at the base. New hardware on failing concrete solves nothing. The concrete itself has to be repaired or replaced.
Hinge Post Reinforcement
With heavy wrought iron, the hinge post takes all the load. On Escondido ranch gates, that post is often undersized for the gate leaf, or it was never set deep enough. We cut out the failed section, set a new post in concrete, and re-hang the gate so it swings without strain on the operator.
Weld and Rust Repair
Inland heat dries out paint, Santa Ana winds blast it with grit, and winter rain works into every seam. Escondido wrought iron rusts from the inside out at the bottom rail. We grind back to clean steel, weld in new material where the section is too far gone, and prime and paint to match. It’s structural work, not a touch-up.
Metal Gate Repair in Escondido
Metal Gate Repair in Escondido runs the range from tubular steel to commercial-grade aluminum. Typical repairs cost $180 to $480. The 1970s through 90s tract homes in 92026 and 92027 often have builder-grade tubular steel gates. The steel is thin, the hinges are undersized, and after two decades of inland sun and rain, the bottom rail rots out. We weld in replacements and reinforce the corner gussets so the gate stays square.
Gate Realignment and Adjustment
Metal gates on Escondido’s east-side lots shift with the ground. When a hillside driveway gate drags or binds after rain, it’s rarely just a hinge adjustment. The gate was set without a level footer, so the entire geometry is off. We re-hang the gate, set proper footings under the posts, and align the operator to the new position.
Operator Motor Strain Repairs
A misaligned gate strains the operator motor. You hear it grind, it runs slower, and eventually it burns out. If we catch it early, we fix the alignment and the motor survives. If we don’t, we’re replacing a board or a whole operator at $400 to $900. We’d rather catch it early.
Trusted Brands We Service in Escondido
If your system is LiftMaster, we know it. If it’s FAAC, we know it. Our techs carry repair parts for LiftMaster, FAAC, Elite, BFT, Linear, Viking, Ghost Controls, DoorKing, and Mighty Mule, so we can handle DoorKing repair in Escondido and service most local operators without ordering parts and coming back. We also service the specialty brands that general repair companies decline or misdiagnose: BFT and FAAC are Italian hydraulic systems, and Ghost Controls is a popular retrofit for ranch gates. A tech who has never opened one will swap the board and hope. We test the whole system: motor, limit switches, safety edges, photocells, and the control box.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Escondido Homes
- Sloped driveways with no level footer. East-side ranch properties off Valley Center Road and around Daley Ranch often have gates set on a slope. Winter rains shift the soil, the gate drags, and the fix is re-hanging plus new footings, not hinge grease.
- Builder-grade operators on undersized posts. Newer tract homes in 92026 and 92027 often have a gate installed manual, then an operator bolted on later without reinforcing the hinge post. The gate sags, the motor strains, and the board burns out early.
- 1920s concrete failure in 92025. Historic homes in central Escondido have wrought iron gates set directly into original concrete. That concrete spalls, the post pulls loose, and standard hinge replacements won’t hold. The concrete has to be repaired or re-poured.
- Sun and Santa Ana damage on exposed gates. Inland Escondido gets 90 to 100 degree summer heat that warps wood gates and dries out operator lubricants. Santa Ana winds strip paint, and winter rain accelerates rust on every exposed steel surface.
Pricing for Gate Repair in Escondido, CA
Here’s what Escondido homeowners can expect. Wrought iron hinge and weld repair runs $220 to $520. Metal gate tube replacement and re-welding runs $180 to $480. A gate re-hang on a sloped driveway runs $350 to $640 because we’re setting footings and re-aligning the operator. Operator motor or board replacement runs $400 to $900 depending on brand and whether it’s a residential swing or a commercial slide. Adding safety photocells for a LiftMaster or Ghost Controls system runs $180 to $320. Every quote is agreed before we start work. No invoice surprises. Call (855) 532-9392 for an exact quote. Estimates are free.
We Also Serve Cities Near Escondido
Our service area covers Escondido and the surrounding communities: Mission Valley East, North City, San Marcos, and 4S Ranch. If you’re just outside Escondido’s ZIP codes of 92029, 92030, 92033, or 92046, call anyway. We’re running routes through North County daily.
Serving Escondido, CA – Our Local Coverage Area
We’re based in the Escondido area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Escondido
Because your gate is likely set on a slope without a level footer. Escondido’s east-side ranch properties were often built with gates installed directly on grade. Winter rains soften the soil, the ground shifts, and the gate drags. The permanent fix is re-hanging the gate and setting proper footings under the posts, not repeatedly adjusting hinges. Call (855) 532-9392 and we’ll assess it for free.
Yes, for most gates. We install operators on existing manual gates, including LiftMaster, Ghost Controls, and Mighty Mule systems. We check the hinge post structure first because an operator bolted onto an undersized post will sag and strain within a year. If the gate itself needs reinforcement, we handle that before automating it. Estimates are free.
Yes, typically it can. The issue is almost always the original concrete around the hinge post. In 92025 historic homes, the concrete has cracked and pulled loose after decades of heat and rain. We remove the failed section, reset the post in new concrete, and re-hang the gate. It’s more involved than replacing hinges, but the repair is permanent.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our techs have certified working knowledge across those nine brands, including FAAC and BFT hydraulic systems that general repair companies typically decline. If your system is one of these, we know it.
Yes. Under UL 325, automatic gate operators must have operational safety entrapment protection: photocells, safety edges, or both. If your gate closes on an obstruction and doesn’t reverse, the sensors have failed or were never installed properly. We install and test safety photocells on every automated gate we service. Call (855) 532-9392 for a safety check.
Written by Neil Strickland, Owner at Gate Repair Rancho Bernardo, serving Escondido since our founding. Electric gate repair is a specialty, not a side job.